Tour

VTX Series S28 Suspendable Dual 18” Subwoofer featuring ultra long throw, patented Differential Drive® VLF transducers configured in a front-loaded alignment with large area, laminar-flow, low-turbulence central port. Includes: (2x) 2269H dual 4-inch voice coil, dual magnet 18” transducers; captive suspension hardware; front NL4 connector for use when S28 enclosures are configured in rear-firing mode to create reverse-cardioid subwoofer arrays. Trapezoidal form factor facilitates tightly-packed cardioid configurations (ground stacked or suspended). Transportation and handling accessories supplied separately. Weight 81.6 kg (180 lb). Black.

VTX Series S28 Accessory Kit for transportation and protection of one VTX S28 enclosure.

Professionel scene monitor med 2 x 10" LF driver og 1 x 3" D2 driver.

Professionel scene monitor med 2 x 12" LF driver og 1 x 3" D2 driver.

VTX V20 ARRAY FRAME for suspending or ground stacking VTX V20 or VTX S25 enclosures. Includes leveling screw jacks; optional extension bar available. Weight 46.3 kg (102 lb). Steel, black.

VTX V20 ARRAY FRAME EXTENSION BAR for use with VTX-V20-AF, front- or rear-mounted. Single (central) or dual (side-mounted) extension bars can be used for added stability and tilt adjustment to facilitate ground stacked systems. Weight 22.7 kg (50 lb). Steel, black.

Array Frame used for suspending or ground stacking VTX V25 series enclosures. The VTX-V25-AF is also compatible with the VTX S28 dual 18” subwoofer enclosures. Includes height-adjustable leveling feet for ground stack applications. Optional VTX-V25-AF-EB extension bar available.

Extension Bar accessory used in conjunction with the VTX-V25-AF array frame for deploying VTX V25 series systems in either compression or tension mode. Five extension bar attachment options provide variable pick point separation (2-point suspension) and added flexibility for single point suspension. The extension bar can be front- or rear-mounted for increased array up-tilt or down-tilt, respectively. When rear-mounted, provides an attachment point for compression suspension. A single extension bar can be installed in the array frame central tube, or alternatively, a pair of extension bars can be front or rear-mounted in left/right array frame tubes. Single or dual extension bars can also be front- or rear-mounted in ground stack applications for extra stability and a wider range of array tilt angle options. Dual extension bars can also be front-and rear-mounted for compression suspension when increased array up-tilt is required.

Factory-approved manual lever hoist for compression of VTX V20 systems. The CM Series 653 for use with VTX V20 is a 3/4 ton model with 20’ of chain length for compressing arrays of up to 20 cabinets with no additional extension hardware needed. Included: 1 x CM Lever Hoist (3/4 ton rating) with 20' of chain

Transform 24 lydkilder til en fantastisk blanding. Dette er ikke lyd magi. Dette er resultatet af en Soundcraft Si Expression 2 Digital Mixer. Et væld af brugervenlige funktioner gør dit live lydliv lettere end nogensinde. Mellem de 24 mikrofonforstærkere, 66 indgangskanaler, 4 interne stereo FX-retur, 8 matrixbusser og 20 undergrupper, er der meget at holde styr på. Det er her den patenterede FaderGlow-teknologi kommer ind. Fadernes dynamiske farvekodning betyder, at du straks kan genkende hvilket afsnit du blander med lidt mere end et blik på faderne. Det er så simpelt.

Soundcraft Mini Stagebox 16i combine high-quality components with a streamlined design, making it easy to add multiple channels of remote-controlled I/O to your Si-series mixing console.