Tilbehør

Connects to top of mic stands for holding 2 microphones or boom arms. 3/8" locking screws, adjustable from 60 to 172 mm.

The flexible microphone bar for microphone stands. Two moveable bars position the microphone where ever you would like it. Each bar is fitted with a captive knurled screw. The entire bar can be screwed onto all standard microphone stands with a 3/8“ threaded connector.

Connects to top of mic stands for holding 4 microphones or boom arms. 3/8" locking screws.

Suitable for microphone arm 23850 and 23860.

Attaches to stands with diameter from 15 to 30 mm. With prismatic clamp connector. Comes complete with adjustable and swiveling boom arm with 3/8" thread.

Zinc die-cast plate. Attachable to speakers. Diameter 105 mm. Four 6.5 mm holes. May be used with distance rods with M20 bolt.

The practical wall and ceiling mount with 3/8” threaded connector has been upgraded. A new feature is a cable outlet, which now provides an internal cable guide for hidden installations. Thanks to two special threaded pins and the Allen wrench / hexagon key included in the delivery, the universal joint can be positioned and set exactly. As such the maximum load increases to 10 kg. The wall distance has been reduced to 160 mm.

Universal wall mount with 3/8" or 5/8" mounting bolt for microphones and antennas. Thanks to the user-friendly ball joint, the mount can be swiveled 360° and tilted 90°. The mounting plate has a diameter of 70 mm and the wall distance is 205 mm

Attractive cover for speaker wall mounts with a wall mounting plate of 160 x 90 mm (e.g. 24471). This cover conceals the fastening parts of the wall mount and thus visually enhances it. The cover can be easily and quickly attached to the installed wall mount and removed again for service work. No tools are required for installation, as the robust cover made of impact-resistant plastic is fastened with magnets. Several cable outlets are provided for concealed cable routing.

To store and transport two lighting/speaker stands 246/1. Sturdy nylon fabric, water-resistant. Two inside compartments and two parallel zip closures with large carrying straps. Black with green K&M logo.

Sturdy carrying case for 3 microphone stand with round base. Tearproof nylon material, water-resistant. The case comes with padded handles and an adjustable shoulder strap. Plastic rubber feet protect the bottom of the case. 3 separate internal compartments and fixed Velcro strips provide maximum protection for the stands.

Steel tube combination to connect satellite systems. With bottom M20 thread to attach connector plate 24116. Zero backlash and absolute vertical position. Height adjustment with spring-loaded locking screw and safety bolt.