Tight AV

DSP control panel with encoder and OLED display. Programmable control panel with encoder and OLED display, for use with the 10x10 DSP Dante

The 2x2 Dante is a network audio interface allowing users to integrate up to 2x2 audio channels of Dante audio into networked AV systems. Each input features a microphone preamplifier and 48V phantom power option. The 2x2 Dante features PoE power capability and local power. A small form factor and included mounting ears makes it easy to add Dante connectivity wherever it is needed. It can be close to the audio source or sink to eliminate the need for costly and interference-prone analog wiring.

Featuring bi-directional Bluetooth audio, the interface allows you to transmit two channels of Bluetooth audio onto the Dante network, and simultaneously receive one Dante channel. The paring is as simple as pressing a button on the front panel, and you can give the unit any friendly name you like. Need more I/O? No problemo. Additional inputs and outputs are available via unbalanced RCA and TRS mini-jack connectors on the front panel. On the setup side, audio routing and control is maintained via Dante Controller and Domain Manager. A web UI handles the configuration of the device itself, with an open API for third-party control. The AU-BT413WP-DA is perfect for simple BYOD, or you could use the call bridging feature for conference calls utilizing the existing audio equipment in the room.

Featuring bi-directional Bluetooth audio, the interface allows you to transmit two channels of Bluetooth audio onto the Dante network, and simultaneously receive one Dante channel. The paring is as simple as pressing a button on the front panel, and you can give the unit any friendly name you like. Need more I/O? No problemo. Additional inputs and outputs are available via unbalanced RCA and TRS mini-jack connectors on the front panel. On the setup side, audio routing and control is maintained via Dante Controller and Domain Manager. A web UI handles the configuration of the device itself, with an open API for third-party control. The AU-BT413WP-DA is perfect for simple BYOD, or you could use the call bridging feature for conference calls utilizing the existing audio equipment in the room.

.

.

DC24V5A 4-PIN PSU EU/UK/US (VC-C101U-ETH (HW1), TNET-ENC-C211-DA)

AUDIO DSP WITH AEC, 4-IN/4-OUT ANALOG AND 2x2 USB

DSP-AEC-1410 | AUDIO DSP WITH AEC, 12-IN/8-OUT AND 2x2 USB

.

Uncompressed 18G HDMI 2.0 Extender set over HDBT3 with USB 2.0 and 1G Ethernet | The EXT-H102UETH-HDBT is a high−performance HDBaseT 3.0 extender set for un-compressed 4K60Hz 4:4:4 HDMI, USB 2.0, Ethernet, RS−232 and IR signals. It supports and can extend HDMI 2.0b, HDCP 2.3 and HDR video up to 100m over a single Category 6A solid core cable. HDBaseT 3.0 standard allows for fully un compressed 18G HDMI signal, 1G Ethernet and improved USB2.0 bandwidth to be extended. Support for bi-directional PoC allows for easy installation by applying power to either the transmitter or the receiver. This extender set is ideal for various applications like conference rooms, education and anywhere where high-quality video, Gigabit Ethernet and/or USB2.0 extension is required.

TiGHT AV's EXT-H211L2-SRX-HDBT er en fremragende løsning til integratorer, der ønsker at distribuere et videosignal over længere afstande og samtidig bevare optimal billedkvalitet. Enheden er udstyret med avanceret skaleringsteknologi, der understøtter valgbare opløsninger fra 1024x768 op til DCI 4K60 (4096x2160@60Hz 4:4:4). Enheden kan automatisk skifte mellem HDBaseT og lokal HDMI-indgang, når en kilde er tilsluttet eller frakoblet, hvilket giver brugeren en problemfri "connect and present"-oplevelse.