TiGHT AV

Vis som Gitter Liste
Sorter efter
Vis per side

TiGHT AV ACP-ENC-OLED | DSP Control Panel With Encoder and OLED Display

670-00030
DSP control panel with encoder and OLED display. Programmable control panel with encoder and OLED display, for use with the 10x10 DSP Dante

TiGHT AV AU-202-DA | 2x2 Dante Interface With 2 Mic/Line Inputs and 2 Line Outputs

670-00050
The 2x2 Dante is a network audio interface allowing users to integrate up to 2x2 audio channels of Dante audio into networked AV systems. Each input features a microphone preamplifier and 48V phantom power option. The 2x2 Dante features PoE power capability and local power. A small form factor and included mounting ears makes it easy to add Dante connectivity wherever it is needed. It can be close to the audio source or sink to eliminate the need for costly and interference-prone analog wiring.

TiGHT AV AU-BT2-DA | Dante-adapter, 2X1 Bluetooth

670-00043
PLUG-AND-PLAY PoE DANTE INTERFACE | AU-BT2-DA from TiGHT AV allows for transmitting two channels of Bluetooth audio to your Dante network and simultaneously receiving one channel of Dante Audio. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. The AU-BT2-DA is a simple and cost-efficient solution to integrate wireless Bluetooth audio to and from a Dante network. Simply pair your device via the button on the adapter, and you are ready to play audio from your device or allow for migrating mobile calls to your Dante-enabled conference system. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2x1 audio channels -Bluetooth 5.0 support -Maximum Bluetooth LoS transmission distance up to 20m -Bluetooth paring button on front •Dante and AES67 support •24-bit audio support •Supports 802.3af PoE •Dante Controller and Dante Domain Manager compatible

TiGHT AV AU-H101A | 18G HDMI 2.0 Repeater With Audio De-Embedding

670-00000
The AU-H101A is a small-size HDMI 2.0 audio de-embedder with 1 HDMI input, 1 HDMI output, and three different types of audio outputs. It is designed to extract audio from a HDMI signal via stereo balanced L/R audio, analog RCA, and coaxial digital audio output. It also features an HDMI equalizer to ensure full HDMI signal integrity is maintained. The AU-H101A can compensate for poor source signals or low-quality cabling at the end of a long cable run. EDID and CEC pass-through ensures that the source video is at the optimal resolution for the display and can be controlled by CEC from source. KEY FEATURES: • De-embeds analog audio and coaxial digital audio from an HDMI signal. • HDMI equalization. • Three selectable audio modes. • 4K@60Hz (4:4:4) and data rates up to 18 Gbps. • HDMI 2.0 and HDR support. • HDCP 2.2/1.4 support. • EDID and CEC pass-through.

TiGHT AV AU-X2I | Dante-adapter, 2 x XLR ind

670-00041
PLUG-AND-PLAY PoE DANTE INTERFACE | AU-X2I-DA from TiGHT AV inputs two channels of analog line level audio to your Dante network. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. Featuring two female XLR standard connectors, the AU-X2I-DA is a simple and cost-efficient solution to connect analog equipment to a Dante network. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2 x line inputs on standard XLR female connectors -Dante and AES67 support •24-bit audio support •Supports 802.3af PoE -Dante Controller and Dante Domain Manager compatible

TiGHT AV AU-X2O | Dante-adapter, 2 x XLR ud

670-00040
PLUG-AND-PLAY PoE DANTE INTERFACE | AU-X2O-DA from TiGHT AV outputs two channels of analog line level audio from your Dante network. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. Featuring two male XLR standard connectors, the AU-X2O-DA is a simple and cost-efficient solution to connect analog equipment to a Dante network. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2 x line outputs on standard XLR male connectors •Dante and AES67 support -24-bit audio support •Supports 802.3af PoE •Dante Controller and Dante Domain Manager compatible

TiGHT AV DA-H4A-DS | 18G HDMI 2.0 1x4 Distribution Amplifier

670-01000
The DA-H4A-DS is an HDMI 2.0 compatible 1x4 auto scaling HDMI distribution amplifier. It supports automatic down scaling so a 4K video input can be down scaled to an 1080p output when connecting a display that only supports resolutions up to 1080p for maximum compatibility in installations with mixed resolution displays. The DA-H4A-DS supports 4K signals up to 4K@60Hz 4:4:4 and features an easy EDID management option using dip switches on the front panel of the unit. Audio can be de-embedded from the HDMI input and outputted as balanced analog audio or digital optical SPDIF. KEY FEATURES: • Supporting resolutions up to 4K@60Hz, 4:4:4 (18 Gbps). • Supports HDR formats such as Dolby Vision. • Balanced analog and digital optical audio outputs for de-embedded audio. • Auto down scaling for maximum compatibility with mixed resolution displays. • Signal equalizer for longer HDMI runs. • Supports cascading up to 6 units. • Input supporting HDCP 2.2, outputs supporting HDCP active or passive mode. • EDID Management and CEC pass-through.

TiGHT AV DSP-AEC-1010-DA | Audio DSP With AEC, 4-In/4-Out Analog, 4-In/4-Out Dante and USB

670-00020
The DSP-AEC-1010-DA is an audio signal processing unit with analog and Dante interface, as well as a USB for computer audio. The unit is configured and controlled from a Windows application that presents an easy to use GUI. Powerful processing with eq, dynamics, mixing and matrix combined with advanced acoustic echo cancellation (AEC) makes this unit suitable for a wide range of use cases. A single network cable connected to a PoE network switch allows for both power, control and Dante audio. Analog audio inputs supports both microphone and line level sources. Phantom power is selectable individually for each channel. USB connection to host computer works as a sound card for easy computer audio connectivity for both playback and recording
Close
Filter by Clear All
Filter by
Filtrer efter egenskaber
  • Længde
Varegrupper
Filters
Sort
display