Optimal Audio SmartAmp 20 | installationsforstærker med DSP, 4 x 125W

Beklager - dette produkt er udgået

SmartAmp 20 is an amplifier with built in Digital Signal Processing (DSP) specifically tailored to optimise the performance of the Optimal Audio loudspeaker range.
Loading...
Septons varenummer: 680-00092
Leverandør varenummer: SAMP20

This four-channel power amplifier can drive either conventional low impedance or 70V – 100V loudspeaker loads. Internal DSP presets of Optimal Audio loudspeakers are selected by switches to the rear of the amplifier, which enable the appropriate EQ and overload protection settings.

The space efficient half-width, 1U, 19” rack housing enables two units to be mounted side by side with a SmartAmp 10 or another SmartAmp 20, allowing up to 8 channels in a 1U space.

The SmartAmp 20 is capable of a maximum of 250W output shared between each pair of channels. This enables SmartAmp 20 to flexibly deliver power required for each channel within a pair, depending on the system requirement. For example, if one channel was to only be using 20W of power for some Up speakers, the other channel in the pair could deliver the remaining 230W of power for a more demanding application.

Power factor Correction power supply technology enables universal AC mains operation, eliminating the need for local market specific power regulation and potential reliability issues. The power supply delivers consistent, regulated power worldwide with ultra low standby power consumption for EuP2103 and energy star compliance.

Features
  • Desktop or rack mounted
  • Signal processing presets for Optimal Audio loudspeakers
  • 125 watts per channel into 4Ω-16Ω and 70V-100V line loudspeaker loads
  • Power sharing technology enables 250 watts from two pairs of channels



This four-channel power amplifier can drive either conventional low impedance or 70V – 100V loudspeaker loads. Internal DSP presets of Optimal Audio loudspeakers are selected by switches to the rear of the amplifier, which enable the appropriate EQ and overload protection settings.

The space efficient half-width, 1U, 19” rack housing enables two units to be mounted side by side with a SmartAmp 10 or another SmartAmp 20, allowing up to 8 channels in a 1U space.

The SmartAmp 20 is capable of a maximum of 250W output shared between each pair of channels. This enables SmartAmp 20 to flexibly deliver power required for each channel within a pair, depending on the system requirement. For example, if one channel was to only be using 20W of power for some Up speakers, the other channel in the pair could deliver the remaining 230W of power for a more demanding application.

Power factor Correction power supply technology enables universal AC mains operation, eliminating the need for local market specific power regulation and potential reliability issues. The power supply delivers consistent, regulated power worldwide with ultra low standby power consumption for EuP2103 and energy star compliance.

Features
  • Desktop or rack mounted
  • Signal processing presets for Optimal Audio loudspeakers
  • 125 watts per channel into 4Ω-16Ω and 70V-100V line loudspeaker loads
  • Power sharing technology enables 250 watts from two pairs of channels



*
*
*
Kunder der har købt denne vare købte også

JBL Control 23-1 | Væghøjttaler m. kuglebeslag, sort

800-00130
Farve: Sort (RAL9004) / Hvid (RAL9016) Spredning: 100 x 100 InvisiBall®kugle beslag. (U bøjle kan tilkøbes) Terminaler: Skrue bøsninger Kan sidde udendørs uden udhæng. (IP44) 100 watt program

JBL Control 50 | Subwoofer m. vægbeslag, Lav ohm/70-100V, Sort

801-00402
Subwoofer med mulighed for vægophæng. Control 50ST er en del af Control 50 serien, hvor man har mulighed for at lave et satellit system med tilhørende Control 52 satellithøjtalere. Det er også muligt at kombinere Control 50ST med enten Control 40 serien eller Control 60 serien, som er hhv. loftindbygning og pendelserierne. Subbassen fås i både hvid og sort finish og har et meget diskret design. Inkl. vægbeslag.

TiGHT AV AU-202-DA | 2x2 Dante Interface With 2 Mic/Line Inputs and 2 Line Outputs

670-00050
The 2x2 Dante is a network audio interface allowing users to integrate up to 2x2 audio channels of Dante audio into networked AV systems. Each input features a microphone preamplifier and 48V phantom power option. The 2x2 Dante features PoE power capability and local power. A small form factor and included mounting ears makes it easy to add Dante connectivity wherever it is needed. It can be close to the audio source or sink to eliminate the need for costly and interference-prone analog wiring.
Filters
Sort
display