König & Meyer

Height-adjustable desktop stand with tilt support. The solid metal construction with the large support plate (230 x 250 mm) is suitable for a wide range of monitors and other equipment in the same size range. The plate can be continuously tilted up to 12.5° and can be moved to optimise the centre of gravity. A stop bar ensures the necessary safety and prevents the monitor from slipping. Four felt-covered support pads provide decoupling under the base plate. The individual height can be adjusted in 4 steps between 350 and 450 mm. In terms of load capacity, the stand can be centrally loaded up to 25 kg. Rubber pads are included for secure, noise-insulating support of the monitors.

Height-adjustable monitor stand with table clamp for near-field monitors. The solid metal construction with the large support plate (205 x 245 mm) is suitable for a wide range of monitors and other equipment in the same size range. A practical table clamp allows it to be attached to tabletops with a thickness of 10 to 52 mm. The individual height adjustment is possible in 6 steps between 335 and 485 mm. In terms of load capacity, a centric load of up to 25 kg is possible. The support plate can be rotated 360° for perfect alignment. Rubber pads are included for secure, noise-insulating support of the monitors

Height-adjustable monitor stand with table clamp for near-field monitors. The solid metal construction with the large support plate (230 x 250 mm) is suitable for a wide range of monitors and other equipment in this size range. The plate can be tilted continuously up to 12.5° and moved to optimise the centre of gravity. A stop bar ensures the necessary safety and prevents the monitor from slipping. The practical table clamp enables attachment to tabletops with a thickness of 10 to 52 mm. The individual height can be adjusted in 4 steps between 335 and 435 mm. In terms of load capacity, a centric load of up to 25 kg is possible. The support plate can be rotated 360° for perfect alignment. Rubber pads are included for secure, noise-insulating support of the monitors.

This stable elegant stand has a 420 x 420 mm cast base with an oversized rod combination. Gradual height adjustment is made by a superior positioning and clamping knob. Quick, uncomplicated mounting of the monitor is accomplished using the suspension device.

Impressive steel stand for monitors with stable, elegant cast base 480 x 480 mm. The large-dimensioned tube combination is gradually height adjustable by means of a spring-loaded clamping knob from 644 to 1044 mm. Depending on the size of the monitor, three different bearing plates 26792 can be mounted.

Bearing plate for monitors, suitable for the design monitor stand 26795. Includes 4 spikes and 4 rubber knobs

Bearing plate for monitors, suitable for the design monitor stand 26795. Includes 4 spikes and 4 rubber knobs.

Bearing plate for monitors, suitable for the design monitor stand 26795. Includes 4 spikes and 4 rubber knobs.

Adapter for design monitor stand 26795 to mount audio monitors and loudspeakers with 36 mm flange bushing. Comes with 2 fastening screws

Impressive steel stand for monitors with stable, elegant cast base 480 x 480 mm. The large-dimensioned tube combination is gradually height adjustable by means of a spring-loaded clamping knob from 794 to 1344 mm. Depending on the size of the monitor, three different bearing plates 26792 can be mounted.

Inexpensive stand with professional features. Fiberglass-reinforced plastic base with foldable legs. Complete with extendable boom arm

Heavy duty stand for amplifiers and mixers. Foldable. Spring-loaded locking bolt and locking screw. Felt-lined supporting brackets.

The amp stand can hold monitors, amps or other equipment to a max. weight of 35 kg without a problem. The angled front legs have significantly improved the stand’s stability and strength. The low centre of gravity ensures even larger amps are securely displayed. The fine adjustment on the supporting leg allows a tilt between 15° and 28°. A microphone can be attached to the telescopic tube using a boom arm with a thread of either 3/8“ or 5/8“. Folds compactly.

Easy-to-install shelf for various components, black. 3 space unit.

Black cast-iron base with a horizontally mounted XLR-style female socket on upper face. Removable plate, suitable for fitting switches, indicators, controls or connectors, with access to space for additional circuitry. Base is fitted with rear-mounted 3-pole XLR male connector.

Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, crackle-free switching, with phantom powering-pilot light, with switch (gray). Two diodes indicate the operating state (voltage / microphone ON/OFF).

Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, without pushbutton or switch.

19" standard 8 unit-rack desk stand. Sturdy U-profile with steel rack rails. Comes with 16 cage nuts and screws.