JBL AWC82 | 8", 2-vejs co-axial, 250W, 120 x 120 grad Lys Grå

HF Compression Driver. 120 X 120 graders spredning. 250W power handling. 8 ohm eller 70/100V via indbygget 200W multi-tap transformer.

Leverandør: JBL

Septons varenummer: 801-02600

Leverandør varenummer: AWC82

Produkt specifikationer

Manufacturer URL	https://jblpro.com/en-US/products/awc82

Kompakt all weather højttaler med 8 LF. JBLs nye AWC højttaler serie består foreløbigt af to modeler AWC82 og AWC129. Begge modeller har det til fælles, at de har god kastelængde, jævn frekvensrespons og høj følsomhed, som sikre højopløseligt musik/tale reproduktion til udendørs installationer.

Features

Highly weather-resistant IP56 rating
Consistent 120° x 120° broadband pattern control
Components:
• 200 mm (8 in) woofer with Kevlar-reinforced cone and 50 mm (2 in) voice coil.
• 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm.
Extraordinary clarity for speech, with extended frequency response for music.
Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
High-power passive crossover network.
Overload protection
80 Hz – 20 kHz frequency response.
200 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ω low-impedance.

Frequency Response (-10dB)	80 Hz – 20 kHz
Frequency Response (±3 dB)	100 Hz – 20 kHz
Coverage Pattern	120° x 120°
Directivity Factor (Q)	8.1 (1 k – 16 kHz)
Directivity Index (DI)	8.4 dB (1 k – 16 kHz)
System Power Rating	250 W 2 hrs. 200 W 100 hrs
Sensitivity (2.83V @ 1m)	94 dB (Ave. 100 Hz – 20 kHz)
Maximum SPL (1m)	Direct 8Ω: 118 dB (peaks of 124 dB) 200 W Tap: 117 dB
Crossover Network	1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF
Nominal Impedance	8 ohms
Transformer Taps	70V: 200W, 100W, 50W, 25W100V: 200W, 100W, 50W
LF Driver	Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.
HF Driver	25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
HF Driver Protection	Minimum audibility SonicGuard™ HF overload protection
Enclosure	ABS with Glass enclosure, heavily braced
Attachment	Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
Grille	Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
Input Connection	CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36")
Environmental	IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).
Dimensions	300 x 300 x305 mm (11.8 x 11.8 x 12.0), cabinet 331 mm (13.0 in) including gland nut 359 mm (14.2 in) including bracket extending to back
Colors	Available in gray (similar to Pantone 420C) and black (-BK)
Net Weight (each)	9.8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket
Shipping Weight	14.1 kg (31.0 lb)
Included Accessories	U-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel.
Crossover Modes	Passive
Nominal LF Driver Impedance	8 ohms
Suspension Attachment	Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.

Overblik
Produktansvarlige
Specifications
Kontakt os
Dokumenter

Highly weather-resistant IP56 rating
Consistent 120° x 120° broadband pattern control
Components:
• 200 mm (8 in) woofer with Kevlar-reinforced cone and 50 mm (2 in) voice coil.
• 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm.
Extraordinary clarity for speech, with extended frequency response for music.
Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
High-power passive crossover network.
Overload protection
80 Hz – 20 kHz frequency response.
200 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ω low-impedance.

Frequency Response (-10dB)	80 Hz – 20 kHz
Frequency Response (±3 dB)	100 Hz – 20 kHz
Coverage Pattern	120° x 120°
Directivity Factor (Q)	8.1 (1 k – 16 kHz)
Directivity Index (DI)	8.4 dB (1 k – 16 kHz)
System Power Rating	250 W 2 hrs. 200 W 100 hrs
Sensitivity (2.83V @ 1m)	94 dB (Ave. 100 Hz – 20 kHz)
Maximum SPL (1m)	Direct 8Ω: 118 dB (peaks of 124 dB) 200 W Tap: 117 dB
Crossover Network	1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF
Nominal Impedance	8 ohms
Transformer Taps	70V: 200W, 100W, 50W, 25W100V: 200W, 100W, 50W
LF Driver	Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.
HF Driver	25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
HF Driver Protection	Minimum audibility SonicGuard™ HF overload protection
Enclosure	ABS with Glass enclosure, heavily braced
Attachment	Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
Grille	Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
Input Connection	CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36")
Environmental	IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).
Dimensions	300 x 300 x305 mm (11.8 x 11.8 x 12.0), cabinet 331 mm (13.0 in) including gland nut 359 mm (14.2 in) including bracket extending to back
Colors	Available in gray (similar to Pantone 420C) and black (-BK)
Net Weight (each)	9.8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket
Shipping Weight	14.1 kg (31.0 lb)
Included Accessories	U-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel.
Crossover Modes	Passive
Nominal LF Driver Impedance	8 ohms
Suspension Attachment	Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.


Lars Christensen Pro Audio Salg Tlf. direkte: 87 36 20 76 Mobil: 29 39 66 46 Mail: lars@septon.dk	Henrik Foldager Pro Audio Salg Tlf. direkte: 87 36 20 73 Mobil: 29 39 81 75 Mail: henrik@septon.dk

Produkt specifikationer

Manufacturer URL	https://jblpro.com/en-US/products/awc82

Dit navn *

Din e-mail *

Forespørgsel *

Product Files

Kunder der har købt denne vare købte også

JBL Control 14CT-BK | Loftshøjttaler, 2 vejs, 4" bas, Sort

801-00006

2-vejs coaxial lofts højttaler. JBL C14C/T er en 2-vejs lofthøjttaler med en 4 bas og en coaksial monteret 19mm tweeter. Kabinettet har plastikkabinet og bagkasse i galvaniseret stål. Bag grillen er der mulighed for justering og valg af 70/100V trafotapning, eller direkte 8ohms drift. Højttaleren dækker et bredt frekvensområde og egner sig godt til tale og baggrundsmusik på moderat lydniveau i forskellige applikationer. Leveres inkl. C-ring og rails. Kan monteres i op til 35mm tykke loftsplader, eller op til 55mm med MTC-TCD tilbehør. God kvalitet til fornuftig pris.. Både 100 volt og 8 ohms installation.. Kan opgraderes til udendørs montering.. Inkl. support skinner og -ring. Fås i hvid og sort.

JBL Control 67HCT | 6 1/2"" pendelhøttaler 8 ohm/70/100V 75°, sort

801-00506

Smal pendel højttalerder er perfekthvor der er højt til loftet. Højttalerne er de samme som i Control 40-serien, men udformet som pendler. De kan kombineres med højttalere både i Control 40 og Control 50-serien. Leveres i sort og hvid, med 4,5 m ledning.

JBL Control 25-1 | Væghøjttaler m. kuglebeslag, sort

800-00131

Farve: Sort (RAL9004) / Hvid (RAL9016) Spedning: 100 x 100 InvisiBall®kugle beslag. (U bøjle kan tilkøbes) Terminaler: Skrue bøsninger Kan sidde udendørs uden udhæng. (IP44) 200 watt program

JBL Control 28-1L | Væghøjttaler., Lav ohm model, Sort

800-00142

The Control 28-1L is a two-way 8” speaker with rich sonic character, wide coverage, consistent coverage, versatile mounting, and a contemporary high-design look that fits into a wide range of decors,