Crown DCi2|2400N | forstærker 2x2400W @ 4 ohm / 70/100V | Phoenix / BLU link | skrueklemme | DSP, HiQnet, GPIO, EN 54-16

Four-channel, 125W @ 4Ω Power Amplifier (EU Version)

Leverandør: Crown

Septons varenummer: 741-02110

Leverandør varenummer: DCI2X2400N-U-EKFX

EAN: 691991009594

Produkt specifikationer

Manufacturer URL	https://www.crownaudio.com/en/products/dci-2-2400n

DriveCore's front-end drive circuits leverage the inherent efficiency of Class D output stages while also maintaining superb sonic characteristics. The end result is an audio amplifier circuit that exhibits the exemplary audio quality of a highly evolved Class AB design. Powering this remarkable amplifier is the pioneering technology of DriveCore™, which integrates the amplifier drive stage into the power output stage fusing everything into a chip the size of a dime.

Features

Flexible Input Routing
Convection Cooled
Universal Power Supply
Integrated Life-Safety Features
Up to 8X125W in 1U chassis with no fan
DriveCore™ technology provides >90% efficiency with no compromise in performance
Patented Feedback and Protection Circuits
Amplifier is stable for 2 – 16 Ohm Loads
XFMR 4/8 needed for 70V/100V Applications

Specifikationer

Frequency Response ( 8 Ohms, 20 Hz - 20 kHz)	+/- 0.25 dB
BLU Link Input Signal to Noise Ratio (A-Weighted)	> 108dB
Total Harmonic Distortion (at full rated power, 20 Hz - 20 kHz)	0.35%
Voltage Gain	34 dB
Damping Factor (20 Hz to 100 Hz)	>5000
Input Impedance (nominal balanced, unbalanced)	10 kOhms, 5 kOhms
Maximum Input Level before Compression	+20 dBu
Load Impedance (Stereo/Dual Mode)	2 - 16 Ohms; 70Vrms and 100Vrms
Load Impedance Bridge Mono	4 - 16 Ohms; 140Vrms and 200Vrms
Cooling	Continuously variable speed forced air, front to back airflow
Required AC Mains (+/- 10%)	100V-240V ~ 50/60 Hz
IEC Power Connector	20A IEC
Dimensions	19" x 3.5" x 19" (48.3cm x 8.9cm x 48.3cm)
Weight	24lbs (10.9kg)

Overblik
Fabrikantens website
Kontakt os
Dokumenter

Flexible Input Routing
Convection Cooled
Universal Power Supply
Integrated Life-Safety Features
Up to 8X125W in 1U chassis with no fan
DriveCore™ technology provides >90% efficiency with no compromise in performance
Patented Feedback and Protection Circuits
Amplifier is stable for 2 – 16 Ohm Loads
XFMR 4/8 needed for 70V/100V Applications

Specifikationer

Frequency Response ( 8 Ohms, 20 Hz - 20 kHz)	+/- 0.25 dB
BLU Link Input Signal to Noise Ratio (A-Weighted)	> 108dB
Total Harmonic Distortion (at full rated power, 20 Hz - 20 kHz)	0.35%
Voltage Gain	34 dB
Damping Factor (20 Hz to 100 Hz)	>5000
Input Impedance (nominal balanced, unbalanced)	10 kOhms, 5 kOhms
Maximum Input Level before Compression	+20 dBu
Load Impedance (Stereo/Dual Mode)	2 - 16 Ohms; 70Vrms and 100Vrms
Load Impedance Bridge Mono	4 - 16 Ohms; 140Vrms and 200Vrms
Cooling	Continuously variable speed forced air, front to back airflow
Required AC Mains (+/- 10%)	100V-240V ~ 50/60 Hz
IEC Power Connector	20A IEC
Dimensions	19" x 3.5" x 19" (48.3cm x 8.9cm x 48.3cm)
Weight	24lbs (10.9kg)

Produkt specifikationer

Manufacturer URL	https://www.crownaudio.com/en/products/dci-2-2400n

Dit navn *

Din e-mail *

Forespørgsel *

Product Files

Datablad DCi Network (pdf).pdf

Kunder der har købt denne vare købte også

BSS BLU-100 | Soundweb London 12x8 matrix m/Blulink, RS-232

720-10111

Konfigurerbar signal processering. 48 kanaler. Front Panel LED. HiQnet konfigurerbar.

BSS BLU-DA | BLU-link til Dante/AES67, 64x64 kanaler

720-19010

The Soundweb London BLU-DA offers Dante / AES67 audio and BLU link. This means that the BLU-DA can be used to ‘add’ Dante / AES67 to one or more BLU link devices. The BLU-DA is configurable through HiQnet™ Audio Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. The BLU-DA features Dante and AES67 audio. The BLU-DA is capable of simultaneously transmitting and receiving up to 64 channels of Dante or AES67 audio (64 x 64). Primary and Secondary ports are provided for fault tolerance. Control is through a separate Ethernet port. The BLU-DA also includes support for Dante 4.0 firmware for integration with Dante Domain Manager. The BLU-DA also features BLU link, a low latency, fault tolerant digital audio bus of 256 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect. The BLU-DA and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution. This signal processor is EN 54-16 Compliant for life safety applications.