BSS MAX

Strøm via ethernet. Konfigurerbar via Audio Architect. 4 programmerbare knapper. 1 programmerbar LCD display.

Ethernet væg controller. Strøm via ethernet. 1 programmerbar knap/encoder. 4 programmerbare knapper (multifarvet). 1 programmerbar LCD display. Sleep funktion.

The Soundweb Contrio EC-4BV is an Ethernet wall controller for use in Harman HiQnet systems. The EC-4BV can control and monitor parameters within BSS Audio Soundweb London and other HiQnet devices, including Crown DCi series amplifiers.

The Soundweb Contrio EC-4B is an Ethernet wall controller for use in Harman HiQnet systems. The EC-4B can control and monitor parameters within BSS Audio Soundweb London and other HiQnet devices, including Crown DCi series amplifiers.

Strøm via ethernet. Kofigurerbar via Audio Architect. 1 programmerbar knap/encoder. 8 programmerbare knapper. 2 programmerbare LCD displays. Sleep funktion.

Strøm via ethernet. Kofigurerbar via Audio Architect. 1 programmerbar knap/encoder. 8 programmerbare knapper. 2 programmerbare LCD displays. Sleep funktion.

The Soundweb Contrio EC-V is an Ethernet wall controller for use in Harman HiQnet systems

Ethernet væg controller. Strøm via ethernet. Konfigurerbar via Audio Architect. 1 programmerbar knap/encoder. Sleep funktion.

The Soundweb London Telephone Hybrid Cards are designed to populate any of the four card slots on Soundweb London BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160 and BLU-120 devices. These cards enable Soundweb London devices to interface with a standard POTS (aka PSTN or Analog PBX) telephone network. The Soundweb London Telephone Hybrid Cards also have two analog inputs which allow each Telephone Hybrid Card to receive two microphone or line level signals. These analog inputs offer Phantom Power, configurable per channel and software controlled analog gain in 6dB steps from 0dB to 48dB.

The BSS Audio BLU-HIF Telephone Headset Interface facilitates connection of the headset jack of a VoIP/digital phone to an AEC input and analog output of a Soundweb London device. The BLU-HIF therefore allows the VoIP/digital phone to be used as the dialing interface and hybrid for a conference system. This simple interface eliminates the programming requirements associated with third-party control systems, while providing a familiar and low-cost dialing interface to the end user. The BLU-HIF features an RJ-22 jack for connection to the headset jack of a VoIP/digital phone, a balanced input (Tx) for sending near-side audio, and a balanced output (Rx) for receiving far-side audio. While the BLU-HIF provides substantial isolation of the Rx and Tx signals, near-side audio will still be heard on the Rx channel due to the presence of side-tone. As such, BSS Audio recommends always feeding the Rx channel to an AEC input, as opposed to a standard analog input. The AEC algorithm will remove the side-tone. The Tx channel connects to a standard analog output. The wiring configuration within the headset jack of a VoIP/digital phone often differs, depending on the manufacturer. The BLU-HIF comes with two cables whose 4P4C RJ-22 connectors are compatible with the two most common wiring configurations found in the headset jack of VoIP/digital phones. The additional 2.5mm jack facilitates connection of two-way communication devices such as cellular phones to the Soundweb London device. This gives the end user the advantage of having an alternate communication path to the outside world, which is particularly useful as a backup to the main phone system.